If Workers Need To Cross Over A Conveyor. It doesn’t matter what equipment you’re renting, at some point ware parts will need to get replaced. To save time, a worker is likely to step over or cross under a conveyor.
The crossing area will usually not have an intermediate rail, Crossovers are an ideal way for people to pass over a conveyor line without interrupting product flow, but they require space on either side of the line in three ways: 1917.48 (a) (2) an elevated walkway with guardrail or equivalent means of protection shall be provided where employees cross over moving conveyors, and suitable guarding shall be provided when employees pass under moving conveyors.
They Range From A Single Belt To A Series Of Belts Spanning Miles.
If workers need to cross over a conveyor: The moving material can create pinch points. Workers may be required to cross a conveyor line to get to an area that is in need of service or maintenance.
Adequate Overhead Space Between The Crossover And.
The code of federal regulations (cfr) is the official legal print publication containing the codification of the general and permanent rules published in the federal register by the departments and agencies of the federal government. Conveyor systems are an important method of material haulage at many surface and underground mines. To save time, a worker is likely to step over or cross under a conveyor.
If Workers Need To Cross Over Conveyors, There Should Be Adequate Crossing Facilities, Such As Bridges, Provided For Them To Use To Do So.
There are routinely hand rails on one or both sides of both the stairs and the conveyor crossing area. Ensure that all accesses and aisles that cross over or under or are adjacent to the conveyor have adequate clearance and handrails or other guards. Does that employee need to be protected by a personal fall arrest system for this brief period of time?
The Stairs On The Ladder Offer Safe Footing For Employees, And The Bridge Over The Conveyor Belting Takes Up Minimal Space To Install.
It doesn’t matter what equipment you’re renting, at some point ware parts will need to get replaced. Fatal accidents related to working near, inspecting, adjusting or maintaining. Workers may be required to cross a conveyor line to get to an area that is in need of service or maintenance.
As Recommended By The Ehedg, Factory Managers Must Avoid Contamination From Motors Or Conveyors Crossing Over Each Other.
What should i know when working at or near a conveyor? Where a conveyor passes over work areas, aisles, or thoroughfares, suitable guards shall be provided to protect employees required to work below the conveyors. Post appropriate hazard warning signs at all crossovers, aisles, and.